2 post cap

2 post cap DEFAULT

Simpson BCS2-2/4 2-2X4 Post Cap - G90 Galvanized

The Strong-Tie BC series offers dual purpose post cap/base for light cap or base connections. The BCS2-2/4 post cap is approved to be installed with the specified nails or Strong-Drive SD connector screws. The Strong-Tie BCS2-2/4 post base features a G90 galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

  • Use all specified fasteners.
  • Do not install bolts into pilot holes
  • BC: install with 16d commons or 16dx2 1/2" joist hanger nails.
  • Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
  • To tie multiple 2x members together, the Designer must determine the fasteners required to join members to act as one unit without splitting the wood.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values

Looking for something different? See the rest of our Simpson BC & BCS Post Caps.

California Residents: WARNING

Show Less

Sours: https://www.fastenersplus.com/products/simpson-bcs2-2-4-2-2x4-post-cap-g90-galvanized

Regis 2" Flat Post Caps - Choose Your Color

Product Description

  • Fits any 2" Regis Aluminum Fence Post
  • Constructed from Durable Zinc
  • Compression Fit Cap Installs Easily
  • Industry Leading AAMA 2604 Powder Coat - No Painting or Staining Required
  • Wide Selection of Colors, Including Textured and Patterned Finishes
  • Lifetime Manufacturer's Warranty Offers Protection and Peace of Mind

Regis 2" Flat Post Caps are designed to fit over the top of Regis 2" fence posts. They tap down easily by hand or with a rubber mallet, and stay in place, adding a finished look to your fence design. Order one cap per post.

Product Reviews

Write a Review
Regis 2" Aluminum Flat Post Caps - Available in 12 Colors
Digger Specialties
Regis 2" Flat Post Caps - Choose Your Color
Sours: https://www.signetfence.com/regis-2-flat-post-caps/
  1. Apple macbook charger
  2. Hair jazz ingredients
  3. Side bangs extensions

1-1/2 inch Cast Iron Post Cap

1-1/2 in post caps made to fit 1-1/2" square post.  Post caps are finished in an extremely durable powder coat for long life or can come as bare metal to let them rust naturally. Caps have squared corners so If you have aluminum fences these will fit those post. Made to order, so please allow a few days for delivery (2 - 4 days usually). 

  • Fits 1-1/2" x 1-1/2" actual size post 
  • Extremely durable cast iron
  • Finished in an extremely durable UV resistant baked on powder coat paint.
  • Easy installation with epoxy

Color Options:

You have 3 different color price options.  The first is Bare Metal which has no protectant and is ready to paint.  Black is our standard color and is what we paint most of our post caps.  If you want a color from the special color list you will need to purchase the special color and then choose a special color from the special color drop down list. If you have any questions, please do not hesitate to contact us.

ShareShare on FacebookPin itPin on Pinterest

Sours: https://madisonironandwood.com/products/1-1-2-post-cap-cast-iron-pyramid-style-post-cap-for-2-post-1-1-2x1-1-2
How to make a fence post cap. DIY fence post cap - Cheap, quick, easy!

The Flat Square Post Cap fits a 4" x 6" (nominal size) wood post externally. Easy to install, simply slide the cap onto the top of the post and secure with glue for extra hold. This rust resistant, UV resistant heavy duty steel post cap will help prevent the wood post from inevitable damage from the elements. Not only will this post cap protect the wood post, it will also add a unique design to an otherwise plain post.
Fits 4 x 6 Nominal Wood Post (Actual 3 1/2" x 5 1/2" OD).


• Color: Silver
• Dimensions: 3 1/2" x 5 1/2"
• Fits Post Size: 4" x 6" Nominal (Actual Post Size: 3 1/2" x 5 1/2" OD)
• Material: Galvanaized Pressed Steel
• Easy To Install To The Exterior Of The Post
• Protects Wood Post From Splitting, Rotting, And UV Damage

**We Strongly Recommended Measuring Your Wood Posts Before Ordering. 4" x 6" Pressure Treated Wood Posts Will Usually Measure 3.65" x 3.65". In some cases the wood post may need to be shaved down in order to make the cap fit.**

Disclaimer: These Post Caps are made for the exact size as advertised. Wood posts tend to vary slightly due to a variety of conditions including temperature changes and cutting imperfections. For installation in extremely cold temperatures, we highly recommend using glue to secure the post cap to the post. As temperatures rise, the post cap will stay firmly in place while the wood swells back to normal size. If the post cap does not fit properly, remeasure the post to ensure that it was cut accurately, even 1/32 of inch can cause an issue. Consult your local lumber supplier regarding which glue will provide the best results your post cap installation.

Additional Information

SKU RFC-312-512
Color Galvanized
Post Size 3 1/2" x 5 1/2" Sq. (Wood 4" x 6")
Coating Galvanized
Metal Type Pressed Steel
Style Flat
Fits External

3 1/2" x 5 1/2" Flat Galvanized Steel Square Post Cap for Wood 4x6 (Fits Actual 3 1/2" x 5 1/2" OD Wood)

You may also be interested in the following product(s)

Sours: https://squarefittings.com/store/3-1-2-x-5-1-2-flat-square-post-cap-for-wood-4-x-6-fits-actual-3-1-2-x-5-1-2-od-wood.html

Post cap 2

Hinkley ~ Luna 2-1/2" Post Cap by Deckorators


Deckorators by Hinkley Lighting allows you to creatively illuminate your outdoor retreat and extend the enjoyment of your favorite natural spaces throughout the evening hours. Available to coordinate with Deckorators decking and railing, Deckorators by Hinkley Lighting is backed by a 5-year LED and Manufacturing Defects Warranty.

LUNA Collection logo

Extend the time spent in your outdoor space by adding low-voltage post caps to your railing. The Luna Post Cap is part of the Deckorators by Hinkley lighting collection. Constructed of solid die-cast aluminum, the  Luna Post Cap is available in multiple colors to match our ALX Classic railing system.


  • Post cap dimensions: 2-1/2" x 2-1/2"
  • Available colors: Black ~ White ~ Matte Black ~ Titanium
  • Cast aluminum construction with durable powder coat finish
  • 12 volt LED – Dimmable
  • ETL listed, wet rated
  • Fully sealed to prevent any water ingression
  • Easily attaches to our ALX Classic Post Sleeve.
  • Can be used on any 2-1/2" x 2-1/2" Post
  • Sold individually
  • The Luna post cap, and all Deckorators by Hinkley Lighting products, have a 2700K color warmth.
Click HERE for installation:

Deckorators® by Hinkley Lighting products have been manufactured under the highest standards of quality and workmanship. All Deckorators® by Hinkley Lighting fixtures are warranted against defects in materials and workmanship for a period of five (5) years, subject to certain conditions and exclusions, from the date the product was shipped to the original end use purchaser. WHAT HINKLEY WILL DO: Hinkley will, at its election, repair, replace or make appropriate adjustment where Hinkley’s inspection (or inspection by Deckorators on Hinkley’s behalf) discloses any such defects occurring in normal usage within the applicable time period above, subject to the following conditions and exclusions. WHAT IS NOT COVERED: The following costs, expenses and damages are not covered by the provisions of this limited warranty: (i) labor costs including, but not limited to, such costs as the removal and reinstallation of Product; (ii) shipping and freight expenses required to return Product to Hinkley. ORIGINAL USER: All warranties only apply to the original end use purchaser and original installation of Products. This warranty is not transferable. THE PROVISIONS OF THIS WARRANTY DO NOT APPLY TO PRODUCTS: (i) used in commercial applications; (ii) used for purposes for which they are not designed or intended; (iii) which have been subjected to alteration, abuse, misuse, negligence or accident; (iv) which have been improperly stored, installed, maintained or operated; (v) which have been used in violation of written instructions provided by Hinkley; (vi) which have been subjected to improper temperature, humidity or other environmental conditions; or (vii) which, based on Hinkley’s examination, do not disclose to Hinkley’s satisfaction non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents, chemicals or abrasive cleaning techniques. THE ABOVE WARRANTIES ALSO DO NOT APPLY IF: • The original bill of sale, delivery date, or product number cannot be verified. • The parts claimed to be defective are not returned for inspection if so requested by Hinkley. • The product is not in the possession of the original end use purchaser. TO OBTAIN WARRANTY SERVICE: Within 90 days of actual or constructive notice of damage covered by this Limited Warranty, please do the following: 1. Assemble the following information: a. A list of the Products for which the claim is made. b. Proof of Purchase of the Product, as shown on the original invoice or receipt. c. Proof of Warranty, as evidenced by the original product label, or a copy of the mark on the Product. 2. Mail the above information to: Deckorators by Hinkley Lighting c/o UFP Warranty Corporation 2801 East Beltline NE Grand Rapids, MI 49525 FINISH WARRANTY EXCLUSIONS: • Outdoor Finishes: Finishes for fixtures installed outdoors are subject to change due to prolonged exposure to sunlight, pollutants and other environmental conditions. Metal finishes on outdoor fixtures will naturally mature over time, changing in appearance and creating a living finish. Painted finishes on outdoor fixtures may naturally fade over time, depending on the fixture’s exposure to the outdoor elements. Thus, any claim for fading, discoloration or “patina” of a finish on an outdoor fixture is not applicable to the above warranty. See the “Finish Care & Cleaning” instructions below for proper care and maintenance of your fixture. • Coastal Environments: The environment within ten miles of a sea coast can be extremely corrosive. Even with the appropriate maintenance, products installed in this environment will typically deteriorate more than products installed in a less severe environment. Some corrosion and/or deterioration is considered “normal wear” in this environment. Thus, any claim for finish failures or for corrosion of other components due to coastal environment conditions is not applicable to the above warranty. ADDITIONAL TERMS: Hinkley does not authorize any person to create for it any obligation or liability in connection with its Products. Hinkley’s maximum liability hereunder is limited to the original purchase price of the Product. No action arising out of any claimed breach of this warranty by Hinkley may be brought by the Original User more than one (1) year after the cause of action has arisen. IMPLIED WARRANTIES INCLUDING THAT OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. HINKLEY AND DECKORATORS DISCLAIM ANY LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply to you. Refer to your local laws for your specific rights under this warranty. FINISH CARE & CLEANING: Initial care for finishes requires only periodic cleaning with a soft cloth, dampened with water. A mild non-abrasive soap may be used along with a soft cloth and water if the fixture is very dirty. Particular care should be taken to avoid abrasive materials and strong cleaning agents as they often destroy the protective coatings and subject the finish to rapid oxidation and/or discoloration. Effective January 1, 2019.

Sours: https://www.deckexpressions.com/hinkley-luna-2-1-2-post-cap-by-deckorators/
Ultra Bright Technologies Solar Post Cap Lights

Round Post Caps Galvanized - Chain Link or Bollard 

Round Post Caps are used to cover the open end of Bollards, Pipe, Fence Posts, Poles, etc. A hot-dip galvanized coating is covering each one of the pressed steel toppers in order to provide a rigid fitting that will withstand even the most brutal of weather.

Frequently Asked Questions:

How do I install these caps?

They slide right over the end of your pole, bollard, pipe, or tubing. The hot dip galvanized finish provides a snug fit. In addition, a rubber mallet can be used to further drive the cap on the end of the post or bollard. If tampering with post caps is a major concern for your application, a self-drilling, and tapping Tek-screw can easily mount itself to these caps and ensure they are not removed. *Note, if using a Tek-screw be sure to use a hot-dip galvanized screw as steel, black coated, and zinc coated will rust over time.

How do know which size round post cap I need for my bollard or chain link pole?

By measuring the outside of your post, pole, pipe, bollard, or tube. If measuring the existing pole is not an option and you do have the original post cap, measure the inside of the post cap. *Note, the post cap is designed to mount over the OUTSIDE of the pipe. The true size needed will be between 1/16" to 1/8" less than the inside dimension of the post cap.

Can these caps slide INTO the post?

No, dome caps of this style are designed with a skirt that slides over the outside of the pipe. You can try your luck by performing a simple search on google with the words, "galvanized pipe plug cap." We tested it and were able to find several plug suppliers. 

Why does dome tops fit OVER the outside of the pipe and not slide inside?

•Dome caps mount on the outside of pipe to eliminate the trapping of water inside the pipe. Galvanized post plugs or pipe plugs allow more water to enter the pipe than skirted dome caps.

Sours: https://fencesupplyco.com/products/dome-top-pressed-steel

You will also be interested:

4.5 Solar Post Cap Lights - Classy Caps - Black Aluminum Set of 2

This set of two Classy Caps Imperial Black 4.5 Solar Post Cap Lights will fit your deck posts that measure 4.5" x 4.5". They have a low profile design, with rugged, maintenance-free powder coated cast aluminum housing, and non-yellowing, curved Plexi-Glas lenses. No electrical wiring or generator is required, all you need is the free solar power from the sun.

The solar fence post lights are easy to install, using the pre-drilled holes and provided hardware, and you will receive up to 10 hours of light duration at night.

You can see for yourself how great the solar cap lights look installed in the picture above, supplied to us by our great customer Brad in DC. He also caught a great sunset, good job Brad!

A Volume Discount of 10% to 20% will be automatically applied with a 3 Set Minimum Purchase of solar deck cap lights. See breakdown below.

With your purchase, you will receive a set of two Black 4 x 4 solar post caps in sealed packages, and two 4.5 x 4.5 mounting bases in a separate plastic bag to fit your 4.5" deck posts. When you order multiple sets, your bag of 4.5 mounting bases may be in a separate box, so be sure to open all boxes to locate your mounting bases.

To change the mounting base, you will need to remove the fixture head by twisting it to the Left, then remove the 4 screws located in the corners that hold the 4" mounting base to the post cap light. Line up the 4.5" mounting base to the screw holes, and reinstall the four screws. Don't forget to take the reflector from the 4 x 4 base, and place it in the indentation in the new 4.5 x 4.5 base. Push the Switch to AUTO, reattach the fixture head by twisting it to the Right, and install onto your post.

If you love this style but need a different color, we also have the Imperial 4.5x4.5 in a White or Bronze Aluminum powder coated finish.


  • 4.5 Solar Post Cap Lights, Black Classy Caps Imperial, Set of 2, Free Shipping
  • Made specifically to fit over actual 4.5 x 4.5 deck posts
  • Volume Discount: Order 3 Sets - 10%, Order 5 Sets - 15%, Order 10 Sets - 20%
  • Low profile solar cap light, measures 6" x 6" x 2.5"
  • Auto switch to turn your solar cap lights ON is under the fixture head lid
  • One 6000K-8000K Ultra Bright 0.5W White LED bulb in each solar light fixture
  • One long life 1.2V AA 800mah Ni-MH rechargeable battery included
  • Crystalline Solar Panel has 0.33 Watts, and will partially charge on cloudy days
  • Inserts are made from durable, non-yellowing Plexi-Glas
  • High Performance solar post cap lights stay lit for up to 10 hours
  • Lights up automatically every night with the auto/off switch
  • Will fit over an actual 4.5" x 4.5" deck post (4.5" x 4.5" adapter included with 4x4 solar light caps)
  • One year Warranty, excluding batteries
  • Manufactured by Classy Caps, with stringent quality control
One Year Limited Warranty from Classy Caps, excluding batteries after first 30 days.
Sours: https://www.naturessolarlights.com/4-5-solar-post-cap-lights-classy-caps-black-aluminum-set-of-2/

1387 1388 1389 1390 1391